AIS is short for Automatic Identification System, a well-known technology utilized by ships and other watercrafts to establish communication. Navionics is a widely used navigational software that provides boaters with access to charts, maps, and other essential tools. This article will provide instructions on how to obtain AIS on Navionics.
Step 1: Install the Navionics App
The first step in getting AIS on Navionics is to install the Navionics app on your device. The app is available for both iOS and Android devices, and can be downloaded from the respective app stores. Once you have installed the app, open it and create an account if you don’t already have one.
Step 2: Connect to a VHF Radio
To receive AIS data on Navionics, you will need to connect your device to a VHF radio that is capable of receiving AIS signals. There are several ways to do this, including using an AIS receiver or connecting directly to the VHF radio’s NMEA output. Once you have connected your device to the VHF radio, open the Navionics app and select “Settings” from the menu.
Step 3: Enable AIS
In the Settings menu, select “Data Sources” and then “AIS”. From there, you can enable AIS reception on your device. You may need to enter some additional information, such as the type of VHF radio you are using and its NMEA port number. Once you have entered all the necessary information, save your changes and exit the Settings menu.
Step 4: View AIS Data on Navionics
Now that you have enabled AIS reception on your device, you can view AIS data on Navionics. Open the app and select “Charts” from the menu. From there, you should see a new layer called “AIS”. Tap on this layer to turn it on, and you will be able to see all vessels in your vicinity that are transmitting AIS signals.
Conclusion
Getting AIS on Navionics is a simple process that can greatly enhance your navigational capabilities while out on the water. By following these steps, you should be able to receive and view AIS data on your device in no time.